Sulfur Compound Instruments
​​
​​​​​​​​​​​​​​​​​​​​​ Conta​​​ct us
Traini​ng
Sales Contacts
Request a Quote
Terms & Conditions
​​ ​
​​

​Model N100
UV Fluorescence SO2 Analyzer​​​
with NumaView™ Software​
N100_Straight_tdylogo_WEB.png​​

 Downloads

  
  
  
092910100C - MANUAL, USER, N100, N100H.pdfN100/N100H with NumaView™ Software Manual19727 KB
22-002A REST API Tutorial For Numaview Instruments - SOX.pdfREST API Tutorial for NumaView Instruments584 KB
NVS Remote Manual - 08492.pdfNumaView™ Software Remote User Guide867 KB
SAL000076K - Environmental Instruments Overview.pdfEnvironmental Instruments Overview610 KB
SAL000114B - N100.pdfN100 Specifications944 KB
Teledyne API N Series Ambient Brochure_17-Dec-2021.pdfN Series Instruments for Ambient Air Monitoring Brochure11385 KB
Teledyne-N-Series-CEMS-Brochure-Final-01-14-21.pdfN Series Instruments for Continuous Emissions Monitoring (CEM) Brochure11049 KB

 Applications


 Specifications



Measurement Units
​ppb, ppm, μg/m3, mg/m3 (selectable) 
​​​ Response Time
​< 120 seconds to 95%
 Ranges

Min: 0 - 50 ppb full scale
Max: 0 - 20,000 ppb full scale (selectable, dual-range supported)
Sample Flow Rate ​650 cc/min ±10%
Zero Noise < 0.2 ppb (RMS)
Span Noise < 0.5% of reading (RMS) above 50 ppb
Lower Detectable Limit
< 0.4 ppb

Precision
​0.5% of reading above 50 ppb

​​ Linearity
​1% of full scale
Zero Drift
< 0.5 ppb/24 hours
Span Drift < 0.5% of full scale/24 hours
Included I/O 1 x Ethernet (TCP/IP)
1 x RS232
2 x front panel USB device ports​
Optional I/O
​Universal Analog Output Board includes (all user-definable):
4 x Isolated Voltage Outputs (5V, 10V; user-selectable)
3 x Individually Isolated Current Outputs (4-20mA)
​Digital I/O Expansion Board includes:
3 x Isolated Digital Input Controls
5 x Isolated Digital Output Controls (user-definable)
3 x Form C Relay Alarm Outputs (user-definable)​
Weight
31 lbs (14.1 kg)

​Dimensions (HxWxD)
​7” x 17” x 24.3” (178 x 432 x 617 mm)
Operating Temperature
​0 - 45°C (with US EPA Approval)

​​​Power
​​100V-240V, 50/60 Hz, Typical consumption 55W

​Certifications
​US EPA: EQSA-0495-100

​​​​​
Specifications are subject to change without notice.
All specifications are based on constant conditions.​​​



 Features


  • Single or dual range capability
  • Hydrocarbon “kicker” scrubber​
  • Internal DC-powered vacuum pump
  • Customizable alerts and continuous​ self-checking
  • Wide operating temperature range​
  • Internal zero and span valves​ (optional)
  • Optional 47mm membrane or longlife sample particulate filter​​

 Description

The Model N100 instrument uses the proven UV-fluorescence principle, combined with a state-of-the-art modular architecture, and intuitive operating software to provide accurate and dependable measurements of low-level Sulfur Dioxide (SO2) gas.

The instrument's UV light source is continuously flashed to provide exceptional stability and long lifetime. Any potential lamp intensity fluctuations or detector drift is automatically managed in real-time using a sophisticated combination of reference readings during the lamp light/dark cycles. Hydrocarbon gases that fluoresce at the same wavelength as SO2 gas are removed from the sample stream through a scrubber (i.e. kicker) and prior to detection to eliminate any potential interferences. The long-life sample filter option further improves efficiency with a ~6 month exchange interval in ambient air quality monitoring applications.

Instrument functions and controls are managed through a series of integrated microprocessor-controlled modules utilizing a simple and reliable CAN Bus communications architecture. Each module is independently assembled and calibrated allowing easy and fast field replacement to maximize instrument uptime.

Intuitive operation and calibration of all N Series products is achieved through the NumaView™ Software interface. The graphical user interface (GUI) is customizable, giving the user fast and efficient access to instrument status, as well as measurement data and diagnostic parameters in either numeric or graphical form. NumaView™ Remote Software (included at no charge) provides the same virtual interface and complete instrument control, as well as access to the instrument's large internal data storage buff​er from a remote PC or tablet.​