M​odel N200
Chemiluminesce​nce NOX-NO2-NO Analyzer
with NumaView™ Software​​
N200_Straight_tdylogo_WEB.png

 Downloads

  
  
  
092910200D - MANUAL, USER, N200, N200M, N200H.pdfN200/N200M/N200H with NumaView™ Software Manual 23800 KB
22-002A REST API Tutorial For Numaview Instruments - NOX.pdfREST API Tutorial for NumaView Instruments584 KB
External Pump Pack Manual - 07900 - E.pdfExternal Pump Pack Manual369 KB
NVS Remote Manual - 08492.pdfNumaView™ Software Remote User Guide867 KB
SAL000076K - Environmental Instruments Overview.pdfEnvironmental Instruments Overview610 KB
SAL000116B - N200.pdfN200 Specifications1011 KB
Teledyne API N Series Ambient Brochure_17-Dec-2021.pdfN Series Instruments for Ambient Air Monitoring Brochure11385 KB
Teledyne-N-Series-CEMS-Brochure-Final-01-14-21.pdfN Series Instruments for Continuous Emissions Monitoring (CEM) Brochure11049 KB

 Applications

 Specifications



Measurement Units
​ppb, ppm, μg/m3, mg/m3 (selectable) 
​​​ Response Time
​< 80 seconds to 95% (in switching mode)
 Ranges

Min: 0 - 50 ppb full scale
Max: 0 - 20,000 ppb full scale (selectable, dual-range supported)
Sample Flow Rate ​500 cc/min ±10%
Zero Noise < 0.1 ppb (RMS)
Span Noise < 0.2% of reading (RMS) above 50 ppb
Lower Detectable Limit
< 0.2 ppb

Precision
​0.5% of reading above 50 ppb

​​ Linearity
​1% of full scale
Zero Drift
< 0.5 ppb/24 hours
Span Drift < 0.5% of full scale/24 hours
Included I/O 1 x Ethernet (TCP/IP)
1 x RS232
2 x front panel USB device ports​
Optional I/O
​Universal Analog Output Board includes (all user-definable):
4 x Isolated Voltage Outputs (5V, 10V; user-selectable)
3 x Individually Isolated Current Outputs (4-20mA)
​Digital I/O Expansion Board includes:
3 x Isolated Digital Input Controls
5 x Isolated Digital Output Controls (user-definable)
3 x Form C Relay Alarm Outputs (user-definable)​
Weight
Analyzer: 35 lbs (15.9 kg)
External pump: 22 lbs (10 kg)

​Dimensions (HxWxD)
​7” x 17” x 24.3” (178 x 432 x 617 mm)
Operating Temperature 0 - 45°C (with US EPA Approval)​

​​​ Power
​Analyzer: 100V-240V, 50/60 Hz, Typical consumption 55W, with internal pump 80W
External pump: 115V, 60 Hz, Typical consumption 85W​
​                             220-240V, 50/60 Hz, Typical consumption 85W

​​​​ Certifications
Specifications are subject to change without notice.
All specifications are based on constant conditions.​​​
​US EPA: RFNA-1194-099​


​​​​

 Features

  • ​Single or dual range capability
  • Automatic converter efficiency compensation
  • Customizable alerts and continuous self-checking
  • Wide operating temperature range
  • Internal DC-powered pump (optional)
  • Internal zero and span valves (optional)
  • Optional 47mm membrane or long-life​ sample particulate filter​

 Description

The Model N200 uses the proven chemiluminescence detection principle, combined with a state-of-the-art modular architecture, and intuitive operating software to provide accurate and dependable measurements of low-level Nitric Oxide (NO), Nitrogen Dioxide (NO2) and total Nitrogen Oxides (NOx) gases.

The instrument reaction cell uses a diffusion-based inlet nozzle to minimize build-up of contamination on the optics, reducing the frequency of maintenance and minimizing drift. Stability is further enhanced using an automatic baseline ​reference cycle which compensates for any potential baseline drift. The result is sensitive, accurate, and dependable performance under the harshest operating conditions.

Instrument functions and controls are managed through a series of integrated microprocessor-controlled modules utilizing a simple and reliable CAN Bus communications architecture. Each module is independently assembled and calibrated allowing easy and fast field replacement to maximize instrument uptime. The long-life sample filter option further improves efficiency with a ~6 months exchange interval in ambient air quality monitoring applications.

Intuitive operation and calibration of all N Series products is achieved through the NumaView™ Software interface. The graphical user interface (GUI) is customizable, giving the user fast and efficient access to instrument status, as well as measurement data and diagnostic parameters in either numeric or graphical form. NumaView™ Remote Software (included at no charge) provides the same virtual interface and complete instrument control, as well as access to the instrument's large internal data storage buffer from a remote PC or tablet.​