Model T200
with NumaView™ Software

​Chemiluminescence NO/NO2/NOX Analyzer

 

 Features

 

  • Ranges: 0-50 ppb to 0-20 ppm, user selectable
  • Selectable ranges, with dual range capability
  • Large, vivid, and durable color graphics display with touch screen interface
  • Ethernet, RS-232, and (optional) USB com ports
  • Front panel USB connections for peripheral devices and firmware upgrades
  • 8 analog inputs (optional)
  • Adaptive signal filtering optimizes response time
  • Temperature & pressure compensation
  • Internal zero & span check (optional)
  • Comprehensive internal data logging with programmable averaging periods
  • Ability to log virtually any operating paramete
  • Two-year warranty

 Downloads

  
  
  
083730200C - MANUAL, USER NVS, T200-T200U.pdfT200/T200U with NumaView™ Software Manual15576 KB
22-002A REST API Tutorial For Numaview Instruments - NOX.pdfREST API Tutorial for NumaView Instruments584 KB
ESD Fundamentals - 04786.pdfFundamentals of Electro-Static Discharge (ESD)216 KB
NVS Remote Manual - 08492.pdfNumaView™ Software Remote User Guide867 KB
SAL000046J - T200.pdfT200 Specifications885 KB
SAL000046K-CN T200.pdfT200规格 (Chinese Specification)927 KB
SAL000076K - Environmental Instruments Overview.pdfEnvironmental Instruments Overview610 KB
T SERIES_6PG.BROCHURE_2018_web.pdfT Series with NumaView™ Software Brochure9567 KB

 Specifications


Ranges Min: 0 - 50 ppb full scale
Max: 0 - 20,000 ppb full scale (selectable, dual-range supported)
Measurement Units ppb, ppm, μg/m3, mg/m3 (selectable)
Zero Noise < 0.1 ppb (RMS)
Span Noise < 0.2% of reading (RMS) above 50 ppb
Lower Detectable Limit < 0.2 ppb
Zero Drift < 0.5 ppb/24 hours
Span Drift < 0.5% of full scale/24 hours
Response Time < 80 seconds to 95%
Linearity 1% of full scale
Precision
0.5% of reading above 50 ppb
Sample Flow Rate 500 cc/min ±10%
Power Requirements 100V-120V, 220V-240V, 50/60 Hz, Typical power 110W
Analog Output Ranges 10V, 5V, 1V, 0.1V (selectable)
Recorder Offset ±10%
Included I/O 1 x Ethernet: 10/100Base-T
2 x RS232 (300-115,200 baud)
2 x USB device ports
8 x opto-isolated digital outputs
6 x opto-isolated digital inputs
4 x analog outputs
Optional I/O 1 x USB com port
1 x RS485
​4 x digital alarm outputs
Multidrop RS232
3 x 4 - 20mA current outputs
Operating Temperature Range 5 - 40ºC (with US EPA Approval)
Dimensions (HxWxD) 7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight Analyzer: 40 lbs (18 kg)
External pump: 22 lbs (10 kg)
Certifications​





Specifications are subject to change without notice.
All specifications are based on constant conditions.​

US EPA: RFNA-1194-099
EU: EN14211 TÜV Rheinland
QAL1 Certified: EN15267
MCERTS: Sira MC 050068/12​
CNEMC: 质(认)字 No. 2015-028 Report ​​​


 Description

 

The Model T200 NO/NO2/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of-the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS monitor.

A unique AutoZero feature provides superb stability by continuously correcting for zero drift, while advanced Adaptive Filtering allows the analyzer to optimize performance under changing conditions.  The Model T200 includes a permeation inlet dryer for ozone generation to provide excellent reliability with no periodic replacement required.  A catalytic exhaust ozone scrubber is standard for maximum safety and pump life.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability.  All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports,​ either locally or by remote connection.

The Model T200 comes with NumaView™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView™ Software​.